John Jordan's products can help you find quality tools for your shop. The company was established in 1953, and was previously known as Victoria Tool Corporation. The company manufactures various components for the die and welding gun. It is located in Warren, Michigan. The company manufactures shims. These items are great for professionals and shops alike.
John Jordan
John Jordan is a world-renowned woodturner and instructor who is also a maker of quality John Jordan tools. He's known for his innovative techniques, finely crafted tools and teaching methods. His many years in the trade have helped him perfect his tools. His creativity and ability to texturize is unmatched, and his tools reflect this. The Smithsonian Renwick Gallery displayed some of his works. John Jordan discusses some of the tools necessary for fine-tuned woodturning.
For turning, John Jordan uses a variety of tools, including gouges, chisels, and rasps. He finishes his cut with a fine ceramic Slip-stone and an angled gouge with a small Burr. This method creates a smooth finish and hides imperfections by texturing. He used a long-edged gouge to accomplish this, as well as a special tool. It features a short handle, an angled straight edge that can be reversibly angled, and a slight burr.
John Jordan Turning Tools
John Jordan Turning Tools is a well-known name among woodturners. This Tennessee master woodturner has created hollow vessels that are featured in almost every major exhibition over the last 20-years. He has won numerous awards and recognitions. His products are in many museums and corporations' permanent collections, including London’s Victoria and Albert Museum. These are some his favorite tools:
John begins his presentation with an introduction about wood. He then explains the properties of wood and how to plan your turns. He also shows examples of green wood work, and explains how to avoid checking in your finished pieces. Finally, you will learn how to use John Jordan Turning Tools in order to make stunning pieces that stand apart from the rest. You're here if you have ever dreamed of becoming a master woodturner.
Straight Tools
Straight Jordan Tools is a series of handpieces designed to hold small and big tools. They are 1-1/4" wide and come in sizes 12-18 and 24 inches. They are made from steel with a foam grip. Straight Handles are suitable for tools with a diameter of 1/2" to 3/4". An adaptor of 3/8" is also available to fit smaller tools. These handpieces also resist rust.
John Jordan's hollowing tools are a standard in furniture-making. These tools have been in use for nearly two decades. They come in two main types, Straight and Hook Tools. These tools are designed for reaching the side and shoulder of turning. These tools are secured with a set screw and can be easily removed to sharpen with a special tool. The Straight Jordan Tool can be used to make a fine-tuned, swan neck, and a perfect-edged circular.
Precision screws
Screw turning is only possible with precision. Precision screws can be ordered in both long and short lengths. Jordan Tools produces precision screws of high quality, such as the patented XRite system. You can also find a wide range of specialized tools from Jordan Tools, including the Y-Rite threaded studs. Jordan Tools can help with screw insertion and removal, whether you are a professional or a home-owner.
Located in Warren, Michigan, Jordan Tools is a multigenerational family business that supplies the automobile and aircraft industries. The company was originally founded to manufacture components for automobiles. However, it expanded into the aviation industry in 1963. The company supplies Tier One supplier and has a well-stocked inventories. Its extensive inventory allows it the flexibility to meet the needs its customers. Out-of-stock components are also available quickly. The company strives to provide its clients with the highest quality products at competitive prices.
JameyJordan Series single-art roll
There are many reasons to choose the Jamey Jordan Series single art roll. The first reason is the flexibility that the single art-roll offers. A nylon bottom die on an upper art roller makes it more flexible and easier than traditional single-art rolls. The upper art roll is stainless steel while the lower art roll is made from nylon. Each type of art roll is used for different purposes. Jamey Jordan Signature Series beads rollers are a great choice for those who are new to bead rolling.
Jamey Jordan Signature Series single-art roll step kits offer durability and versatility. The kit includes a Friday tour and a Saturday class with dinner. It can be custom made. You can ask the company for a demonstration if there are any doubts. They'll be happy to show you how to use the tool. The class is approximately 1000 for each participant. Alternatively, you may visit the Mittler Brothers showroom. There you will be given a video tutorial which will show you how to use your tools.
FAQ
Do you have any suggestions for starting a woodworking shop?
It takes a lot of effort to start a woodworking business. However, if you are passionate about your hobby you will be willing to put in the effort. You will probably love the challenge of starting your own business.
It is important to remember that unexpected problems may arise when you start a new venture. You might run out unexpectedly of funds. Perhaps customers won't pay you as much as you had hoped. To survive, you'll need to be prepared for such situations.
One good tip is to set up a separate bank account specifically for your business. This will ensure that you always know how much money has come in.
How can I learn basic skills in woodworking?
A great way to start learning how to build furniture is by building a simple bench for yourself. This project can be done with any kind of wood that you have at home. If you aren't sure what type of wood to use, you can buy cheap pine boards from Lowes or Home Depot. After building your bench, sand off any rough edges and apply a stain or varnish.
What is the difference in plywood and particleboard?
Plywood can be described as a mixture of layers and wood that have been pressed together with pressure. Plywood can be cut to different thicknesses. It's commonly used as flooring and cabinets. Particle board is made from sawdust mixed with resin and then compressed into large blocks. It is used primarily for home improvements. Both types are sturdy and easy to cut.
How can I keep my shop organised?
Setting aside an area to store tools is the first step in keeping your workshop organized. Keep your tools away from dust and debris, so they stay sharp and ready to work. Hang tools and accessories using pegboard hooks.
Statistics
- The best-paid 10 percent make $76,000, while the lowest-paid 10 percent make $34,000. (zippia.com)
- In 2014, there were just over 237,000 jobs for all woodworkers, with other wood product manufacturing employing 23 percent; wood kitchen cabinets and countertop manufacturing employing 21 percent. (theartcareerproject.com)
- Overall employment of woodworkers is projected to grow 8 percent from 2020 to 2030, about as fast as the average for all occupations. (bls.gov)
- If your lumber isn't as dry as you would like when you purchase it (over 22% in Glen Huey's opinion…probably over 10-15% in my opinion), then it's a good idea to let it acclimate to your workshop for a couple of weeks. (woodandshop.com)
External Links
How To
How to stain wood
The process of staining wood involves the application of chemicals to the wood's surface, which causes it to change its color. The wood will turn from white to brownish-red due to the chemical reaction. Oak is the most commonly used wood for staining, but other woods can also be stained.
There are many options for applying stains to wood surfaces. Mixing the stain in a solvent such as turpentine and spraying it onto the wood is one method. Other methods use a solution of water and dye applied directly to the wood. The stain can be mixed with paints and varnishes to become part of the final coating.
Preparing the wood surface is the first step to staining it. To apply the stain, clean the wood completely. Sanding can smoothen out scratches and uneven spots. Next, you need to decide which stain you want. Penetrating stains are different from non-penetrating. Penetrating stain penetrates deeper into wood than nonpenetrating, making them suitable for dark colors like mahogany. Non-penetrating stains work best with light colors like maple.
Once you have decided on the stain type that you want, get your tools ready. Paintbrushes are great for applying stain because they allow you to evenly spread the liquid across the surface. It is a good idea to have rags on hand in case you need them to clean up any stains that may remain after you have finished painting. If you are planning to mix your stain, ensure you have enough containers for each component.
Once you have prepared all your materials, it is time to clean the areas where you will stain the wood. Clean the area with soap and warm water to get rid of dirt and grime. Wipe down all furniture pieces with a dampened cloth and clean water. Make sure you eliminate any loose debris, especially if you plan to stain darker wood.
Apply the stain. The stain can be applied by spraying or brushing the stain onto one end of the furniture. Work slowly and carefully, moving back and forth along the grain of the wood until you reach the opposite end. The stain should not drip off of the wood's edge. Before proceeding to the next step, let the stain dry thoroughly.
Apply a clear polyurethane sealant to protect the painted surface. Apply three coats of polyurethane sealer. Allow the third coat, which should dry overnight, to dry before sanding.